<< Go back to Projects

Keychains

Dragon's keychains. Keychain are easy and fast to make. Plus you use it on a daily basis, while for leather bags, you have to watch out for the weather.



Table of Content

  1. Templates and Inspiration
  2. Step-by-Step

Templates

Try to reproduces these two drawing on leather:

Shape of the keychain following:

Step-by-step

Materials

For one keychain:

  • One ring
  • Piece of leather 6 x 15 cm (here 3mm, but 2 mm is okay, cowhide)
  • Rivet (2mm diam)


Tools necessary:

  • cutter
  • knife opener
  • beveler
  • hammer (for the rivet)
  • Black, Silver, and Gold acrylic painting
  • Super-Shene protector
  • Antic dye (havan color here)


Time:

Approximately 4 hours

  • 2 hours for cutting the leather and drawing on it
  • 1 hour for painting + time to dry
  • A few minutes to drill the rivet’s hole and finish the keychain


Prepating the templates

To give you an idea of the size in mm.

Cutting the leather

Optimize the space to avoid wasting leather.

Cut the piece progressively.

Remove some material with a razor under the smallest extremity so you can bent the piece of leather.

Cut the edges.

  • Top: cutted,
  • Bottom: uncutted.

Then, burnish edges to get a smooth border.

  • Top: Burnished
  • Bottom: Not yet

Reproducing the drawing

Then, make the background.

After drying completely.

Coloring

Pain first the background.

Apply Super-Shene on the two monsters and then apply the antic dye.

(On the photograph, with the light, the difference between the borders’s and the monsters’s color is almost invisible).

Add the final colors.

Finishing

Drill holes, add the ring and finish with a rivet.



>> You can subscribe to my mailing list here for a monthly update. <<